Shingle roof- labor/material

TEAR-OFF

$ 150 Material- $260
  • Removal & Dump of up to one layer
  • Wood repair up to 10% at no charge
  • Install synthetic underlayment with plastic cap nails
  • Install new edge metal 2x2/ 3x3
  • Replace all metal flashings around pipes, vents, chimneys and valleys as needed
  • Shingle installation - Owens Corning, GAF or equivalent
  • Replace/ add attic ventilation- Low profile vents (O'hagen)
  • Coordinate w/ office and pass necessary inspections- Permit fees not included!
  • Haul away all debris

Popular

RE-DECK

$ 185 Material- $260+85
  • Removal & Dump of up to one layer
  • Wood repair up to 10% at no charge
  • Provide and install 1/2” OSB plywood
  • Install synthetic underlayment with plastic cap nails
  • Install new edge metal 2x2/ 3x3
  • Replace all metal flashings around pipes, vents, chimneys and valleys as needed
  • Shingle installation - Owens Corning, GAF or equivalent
  • Replace/ add attic ventilation- Low profile vents (O'hagen)
  • Coordinate w/ office and pass necessary inspections- Permit fees not included!
  • Haul away all debris

OVER-LAY

$ 80-100 Material-$240
  • Install synthetic underlayment with plastic cap nails
  • Replace all metal flashings around pipes, vents, chimneys and valleys as needed
  • Shingle installation - Owens Corning, GAF or equivalent
  • Coordinate w/ office and pass necessary inspections- Permit fees not included!
  • Haul away all debris

Additional Prices

  • Additional layers (Shingle) $15 per layer
  • High pitched roof (over 7/12) $20-60 per sq.

    7/12- $20 | 8-10/12- $40 | 11-12+/12- $60

  • Double hand trash (No access for dumpster) $15 per sq.
  • Double hand material (No access for delivery) $15 per sq.
  • Wood replacement over 10% (1x / 2x) $1-$1.5 per lin. ft.

    $1.5 for first 150' | $1 over 150"

  • Plywood replacement $15 per sheet
  • Remove tile and shingle installation $15 per sq.
  • Double Underlayment Installation $0 per sq.
  • Plywood Demolition (exposing rafters) $20 per sq
  • Roof covering $150-250
  • Remove Solar Legs $0 per panel
  • Skylight Installation $0 ea
  • Minimum Job (under 8 sq) $0 per job
  • Ridge Cap Replacement Only $0 per foot
  • Ridge Vents Installation $0 per foot
  • Build Cricket $150 ea
  • Presidential Shingles Installation $30 per sq

Torch down- labor/material

TEAR-OFF

2-ply system
$ 150 Material- $220
  • Removal & Dump of up to one layer
  • Wood repair up to 10% at no charge
  • Install base sheet with metal cap nails
  • Install new edge metal 2x4/ 3x3
  • Replace all metal flashings around pipes, vents, chimneys and valleys as needed
  • Install Torch Down rolls per manufacture specifications
  • Coordinate w/ office and pass necessary inspections- Permit fees not included!
  • Haul away all debris

Tear-off

3-ply system
$ 200 Material- $305
  • Removal & Dump of up to one layer
  • Wood repair up to 10% at no charge
  • Install base sheet with metal cap nails
  • Torch down poly-smooth torch or equivalent
  • Install new edge metal 2x4/ 3x3
  • Replace all metal flashings around pipes, vents, chimneys and valleys as needed
  • Install Torch Down rolls per manufacture specifications
  • Coordinate w/ office and pass necessary inspections- Permit fees not included!
  • Haul away all debris

OVER-LAY

No tear off
$ 80-100 Material- $220
  • Pass pre inspection for overlay with city official
  • Install base sheet with metal cap nails
  • Install Torch Down rolls per manufacture specifications
  • Coordinate w/ office and pass necessary inspections- Permit fees not included!
  • Haul away all debris

Additional Prices

  • Additional layers (Shingle, Torch) $15 per layer
  • Additional layers Tar and gravel $15 per layer
  • Double hand trash (No access for dumpster) $15 per sq.
  • Double hand material (No access for delivery) $15 per sq.
  • Wood replacement over 10% (1x / 2x) $1-$1,5 per lin. ft.

    $1.5 for first 150' | $1 over 150"

Additional Roofs Pricelist- labor/material

Tile Reset

S-tile and Flat tile only
$ 200 Material- $165
  • Remove existing tile and place aside
  • Remove existing paper and inspect wood deck - replace up to 10% at no charge
  • Install new synthetic underlayment UDL30 or equivalent / or 30 lbs paper upon request
  • Install new edge metal 2x2/ 3x3
  • Install new metal flashings around pipes, vents and valleys as needed
  • Re-install field, rake and ridge tile back into place
  • Haul away all debris
  • Additional charges: Permit fees, New tile to replace

Elastomeric Silicon Coating

$ 80-100 Material- $200
  • Pressure wash and clean roof
  • Apply base coat of primer - APOC / Tropical
  • Install polyester mash around troubled areas as needed
  • Apply elastomeric silicon top coat - APOC / Tropical
  • Apply white mastic (plastic cement) after roof copating cures
  • 20 year warranty system

TPO / PVC

$ 190-235
  • Please call for scope of work and further details